{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}

{{ 'in_app_browser_popup.desc' | translate }}

目錄 購物車 {{currentCart.getItemCount()}}
LIQUI MOLY 水箱散熱清潔劑 冷卻系統散熱清潔

LIQUI MOLY 水箱散熱清潔劑 冷卻系統散熱清潔

冷卻系統/暖氣系統中的沉積物會阻礙熱交換、堵塞恆溫閥門以及調節器。溫度過高可能會使引擎受損。本產品可以清除沉積物及油水現象，使引擎在最佳溫度下運行。

HK$150.00
HK$139.00
{{shoplineProductReview.avg_score}} {{'product.product_review.stars' | translate}} | {{shoplineProductReview.total}} {{'product.product_review.reviews' | translate}}
{{amazonProductReview.avg_rating}} {{'product.product_review.stars' | translate}} | {{amazonProductReview.total_comment_count}} {{'product.product_review.reviews' | translate}}
數量 組合數量
一次最大商品購買數量限制為 99999
該數量不適用，請填入有效的數量。
售完

商品存貨不足，未能加入購物車

您所填寫的商品數量超過庫存

{{'products.quick_cart.out_of_number_hint'| translate}}

{{'product.preorder_limit.hint'| translate}}

每筆訂單限購 {{ product.max_order_quantity }} 件

現庫存只剩下 {{ quantityOfStock }} 件

若想購買，請聯絡我們。

商品描述

若水箱長期使用，會有雜質使得溫度過高，會造成行駛之危險
此款商品可有效去除水箱內雜質，防止水箱溫度過高，讓您行駛更安心降低危險











冷卻系統/暖氣系統中的沉積物會阻礙熱交換、堵塞恆溫閥門以及調節器。溫度過高可能會使引擎受損。本產品可以清除沉積物及油水現象，使引擎在最佳溫度下運行。
本產品300ml可搭配10L冷卻水使用。相容所有標準的冷卻劑及防凍液。

使用方法：
將本產品添加到水箱冷卻水中。
然後開啟加熱器（heater）將溫度、風量開到最大，根據髒污程度，讓引擎運轉 10 – 30 分鐘。
完成清潔後，排出冷卻劑/清潔劑混合物，然後用蒸餾水徹底沖洗冷卻系統，之後根據製造商的說明重新注入。
本產品（300 毫升）足以對應 10 升冷卻液（劑量 1:33）

Description
Deposits in the cooling/heating system create blockages for heat exchange and they also block thermostat valves and control mechanisms. When engine temperatures are too high, the engine runs uneconomically and suffers excessive wear at considerable risk of damage. LIQUI MOLY Radiator Cleaner removes deposits containing oil and lime, and ensures that the engine runs reliably and at the optimum temperature. Does not contain aggressive acids or alkalis. For all coolant and heating systems in water-cooled engines. 300 ml is sufficient for 10 l of coolant (dosage 1:33). Compatible with all conventional coolant additives and antifreezes (with the exception of “low conductivity” coolants).

removes oil and greasy residue
chemical conversion of lime
does not contain acids or alkali
compatible with antifreeze
neutral behavior on rubber and plastics
neutralizes acids
disperses sludge

Application
Add contents to the cooling water. Then start up the heater and, depending on the level of contamination, let the engine run at operating temperature for 10 – 30 min. After finishing cleaning, drain the coolant/cleaner mixture, thoroughly flush the cooling system with water and refill it according to the manufacturer’s instructions. The content (300 ml) is sufficient for 10 l of coolant (dosage 1:33).



顧客評價

{{'product.product_review.no_review' | translate}}

相關產品