Remove stains: Use stain remover to get rid of dirt and asphalt and clean the car.
Remove brake dust: use the brake dust remover to solute some part of carbon or brake dust and wash clean. Then use the clay to thoroughly clean the particle residue and clean the car.
Polish: Polish the car paint, suggested to use the polishing wax. If there is not stain remover or brake dust remover tools or detergent, it can be polished directly. But should choose the compound to precede polishing work from coarse, medium to fine consistency in order then finished by wash the car.
Degreasant: Use the degreasant to remove the polish residue and other organic silicon material on paint. If there is no degreasant application, coating can still be applied but it will not be as effective as it should be.
Coating: Firstly drop 5 drips to the applicator sponge and wipe horizontally then vertical direction to the 40cm*40cm squared area.
After this step, calculate the cure time and use the clean towel to wipe on surface to check if there is any resistance then polish the paint. Remember this timing then use this timing to apply the coating to the whole car from front to back and top to bottom
Checking: Do a thorough check the entire car paint to see if there is any solidifying coating residue.
Waiting: After the coating complete, the car needs to be parked indoor for at least 2-3 hours before hands back to customer. During the waiting time, do not use any water to the car nor touch the surface.
Product name：Vanguard Inorganic Crystals Coating For Car Paint
Capacity：50ml
Origin：Made In Taiwan
Ingredients: 76% Sio2 fluro
Use it under the cool and shade with good ventilation.
Please wear gloves when apply it if skin sensitives or need to use for long time.
Please seek doctor immediately and do not force to emetic if ate the product accidentally.
